Is it necessary to consider the number of devices when selecting a patch panel?- Cixi Shuaiye Communication Equipment Co., Ltd

Is it necessary to consider the number of devices when selecting a patch panel?

When selecting a patch panel, the number of devices needs to be considered, which is one of the key factors to ensure a reasonable network system structure and easy maintenance. The following is a point by point introduction:

1. Determine the required number of ports
Ports need to match the number of devices: each device usually corresponds to one port, so the number of patch panel ports should be selected based on the current total number of devices (such as computers, printers, cameras, etc.).
Reserve expansion space: It is recommended to reserve 20% -30% of ports based on the number of devices to cope with future device additions or network adjustments.

2. Avoid resource waste and congestion
Too few ports: Insufficient number of ports can cause temporary jumper confusion, increase wiring difficulty, and be detrimental to maintenance.
Excessive ports: Although there is margin, excessive redundancy may result in wasted space and increased costs.

3. Reasonably distribute the number of distribution frames
Multi device distribution scenario: If devices are distributed on multiple floors or areas, multiple patch panels should be reasonably distributed to avoid excessively long jumpers or wiring circuits.
Centralized/distributed design combination: Large projects can set up main distribution frames and sub distribution frames for regional management.

4. Considering the specifications of network devices
Match the number of switch ports with the distribution frame: If a 24 port switch is used, a 24 port or 48 port distribution frame can be selected to achieve neat correspondence.
Different types of equipment requirements: If there are network equipment, voice equipment, and fiber optic equipment at the same time, different types of patch panel combinations should be configured.